Бетонні вентиляційні блоки для каналів — ПВК Арсенал

Ventilation Blocks: Installing a Floor-by-Floor Ventilation Shaft

How a continuous shaft is assembled from ventilation blocks: crane installation floor by floor, duct alignment, airtight joints and why verticality matters.

A ventilation block is a precast reinforced-concrete element with ready-made ducts. The blocks are installed floor by floor, and their ducts join into a continuous ventilation shaft without on-site bricklaying.

Installing the shaft floor by floor

  1. The block is set with a crane on the floor slab, aligning the ducts with the block on the floor below.
  2. Verticality is checked — stable draught depends on it.
  3. The duct joints are sealed so the shaft is airtight.
  4. The shaft is built up floor by floor to the roof outlet.

Why accuracy matters

If the ducts are offset or the joints are not airtight, the draught worsens and air can leak between ducts. The factory geometry of the blocks and verticality control during installation give an even, working shaft.

What to consider

  • Number of storeys and the ventilation scheme per the project.
  • Number and purpose of ducts (exhaust, smoke removal).
  • Alignment with floor slabs and the roof outlet.
  • Code requirements for building ventilation.

We will select the ventilation-block size for your project and arrange production and delivery — PVK Arsenal.

All news

More news

Ventilation Blocks: Installing a Ventilation Shaft | PVK Arsenal