
Installing Reinforced-Concrete Stair Flights: Joining with Landings
How reinforced-concrete stair flights are installed: preparing the supports, crane installation, joining with landings and what to consider for an even, safe passage.
A reinforced-concrete stair flight is installed with a crane in the stairwell. Even, safe stairs depend on precise joining of the flights with the landings and correct bearing on the load-bearing structures.
Preparation
- Check the bearing surfaces and embedded parts of the landings and walls.
- Set out the level marks for each flight.
- Prepare the bearing areas and mortar for the supports.
Installation
- Lift the flight with a crane by its lifting loops.
- Set the flight onto the landing supports according to the layout.
- Align it to the level and the design marks.
- If required, fix it by welding at the embedded parts.
Joining with landings
Flights bear on floor and intermediate landings, or a flight combined with half-landings in a single unit (type ЛМП) is used. Precise bearing and bonding give an even passage without steps or extra on-site fitting.
What to consider
- Flight type: with separate landings or with half-landings.
- Floor height and the required number of steps.
- Design load and the building's use.
- Compatibility with the floor landings.
We will select the stair-flight size for your project and arrange production and delivery — PVK Arsenal.



